Display Curves

Access: Open this function from the following location:

Select View > Settings> Display Curves from the menu bar.

This Display function appears as an ON/OFF toggle button in the menu. When ON, the button is highlighted and the specified entities are displayed.

Display the section and cross-section curves of faces.

The Display Curves function allows you to display section and cross-section curves for one or more faces. Displays curves are shown according to the U / V directions of a face and its boundaries.

When you access the function, the Display Curves dialog appears where you can specify the number of sections and cross-sections.

Select the first face you want to section.

A set of S and C arrows appears: S representing the direction of the section curves and C representing cross-section curves.	Continue to select faces to be sectioned as required.



When you have finished selecting, press Apply in the Display Curves dialog. The sections remain displayed on the selected faces.	The display curves are highlighted when the cursor hovers over the sectioned faces.

Display curves are used only for display purposes. You can create actual curves from display curves by using the function Curves > From Face.

Some functionality may be dependent on the product package. Contact your Reseller if you require a license.