|
|
Tool Direction
Define the tool direction during milling operations. This parameter appears in the Guided Cleanup and Multi Axes Guided Cleanup procedures.
|
Keep in Z Direction |
This is the only option available for the Guided Cleanup procedure. The Guided Cleanup procedure
ignores the direction vectors from the Remachine
Segments Table. Each segment or group of segments are milled from
the Z direction. In this case a Cleanup procedure is created for each
direction.
|
|
Tilt to Curves Vectors |
This is the only option available for the Multi Axes Guided Cleanup procedure. The Multi Axes Guided Cleanup
procedure uses the direction vectors from the Remachine
Segments Table. This procedure tilts all motions created by a pencil
curve to the vector direction of that curve. Each segment or group of
segments are milled by the direction associated with it, making it a 3+2
Axis procedure. The angle between the direction of a curve selected in Multi Axis Guided Cleanup and the UCS of the procedure cannot exceed 90°. This is checked when saving or calculating the procedure. The procedure will be calculated separately for each direction.
|
|
