|
|
Parameter Relations: Clear 
Access: Open this function from the following location:
-
Select NC Edit > Change Parameters > Clear Relations from the menu bar.
Clear all parameter relations in the active procedure.
In NC parameter tables, the following symbols define the status of parameter values that can be or have been defined by using relations:
|
|
No relation used: A relation can be used to define this parameter value; currently no relation is specified. |
|
|
Relation used - legal result: A relation was used to define this parameter value and produced a legal result (the calculated result is within the allowed range of values permitted for this parameter). |
|
|
Relation used - illegal result: A relation was used to define this parameter value but produced an illegal result (the calculated result is beyond the allowed range of values permitted for this parameter). In this case, the displayed result is the nearest permitted value (i.e., either the lowest or highest permitted value). |
In the examples below, note that all the parameter relations are cleared after invoking this function.
|
Parameter relations defined: |
Parameter relations cleared: |
|
|
|
|
