|
|
Table of Ejectors 
Access: Open this function from one of the following locations:
-
Select Mold Design > Ejection > Table of Ejectors from the menu bar.
-
Select Ejection > Table of Ejectors from the Mold Design Guide Toolbar.
Create a Table of Ejectors. The function automatically selects known ejection devices, numbers them, and creates corresponding numbers as engravable text on the pins and their holes in the ejector retainer plate. Several options allow you to control the numbering scheme as well as the size and style of the text. In addition, the function also outputs a full table of the ejectors to an Excel report, with information such as the ejector diameter, length, XY location, and BOM ID number.
|
A project with multiple ejectors. |
The result of the execution of the Table of Ejectors showing the numbers created on the ejectors. |
The holes the ejectors go through are also numbered. |
|
|
|
|
The Table of Baffles tool also supports the same capabilities as the Table of Ejectors.
General Interaction
The following is the Feature Guide for Table of Ejectors.
|
|
|
Tip:Required Step 1 
: Select the required ejectors.
Optional Step 1 
: Manually select a target plate face upon which all plate text will be positioned.
Detailed Interaction
See Options and Results.
|
