Editing the Runner
Each of the features created during the runner design process can be edited. These are as follows:
- Editing the Plane feature
- Editing the Runner Sketcher feature
- Editing the Runner Body feature
- Editing the Runner Merge feature
- Editing the Runner Assembly Cut feature
- Editing the Runner Part feature
- Editing the Cut by Runner feature
Editing the Plane feature
Activate the Runner Part in the Assembly Tree, then edit the relevant Plane feature in the Feature Tree as detailed below.
Right-click on the relevant feature in the Feature Tree, and from the displayed popup submenu, select Edit Feature or Edit Reference Feature as required (see Editing a Feature).
The appropriate function is invoked with the Feature Guide automatically opened at the relevant step. Proceed through the function's steps to edit the feature/reference feature as required.
Click OKOK
or ApplyApply
in the Feature Guide to complete the function.
Editing the Runner Sketcher feature
Activate the Runner Part in the Assembly Tree, then edit the relevant Sketcher feature in the Feature Tree as detailed below.
Right-click on the relevant feature in the Feature Tree, and from the displayed popup submenu, select Edit Feature or Edit Reference Feature as required (see Editing a Feature).
The appropriate function is invoked with the Feature Guide automatically opened at the relevant step. Proceed through the function's steps to edit the feature/reference feature as required.
Click OKOK or ApplyApply in the Feature Guide to complete the function.
Editing the Runner Body feature
Edit all the runner body parameters that were available during the creation stage. The Runner Body feature can be edited using one of the following methods:
-
Activating the required assembly
Activate the required assembly in the Assembly Tree, then edit the relevant Runner Body feature in the Feature Tree as detailed below. -
Activating the runner part
Activate the required assembly in the Assembly Tree, then edit the relevant Runner Body feature in the Feature Tree as detailed below.
Right-click on the relevant feature in the Feature Tree, and from the displayed popup submenu, select Edit Feature or Edit Reference Feature as required (see Editing a Feature).
The appropriate function is invoked with the Feature Guide automatically opened at the relevant step. Proceed through the function's steps to edit the feature/reference feature as required.
Click OKOK or ApplyApply in the Feature Guide to complete the function.
Editing the Runner Merge feature
Activate the Runner Part in the Assembly Tree, then edit the relevant Merge feature in the Feature Tree as detailed below.
Right-click on the relevant feature in the Feature Tree, and from the displayed popup submenu, select Edit Feature or Edit Reference Feature as required (see Editing a Feature).
The appropriate function is invoked with the Feature Guide automatically opened at the relevant step. Proceed through the function's steps to edit the feature/reference feature as required.
Click OKOK or ApplyApply in the Feature Guide to complete the function.
Editing the Runner Assembly Cut feature
Use this option to add / remove components to or from the list of the cut components.
Activate the required assembly in the Assembly Tree, then edit the relevant Assembly Cut feature in the Feature Tree as detailed below.
Right-click on the relevant feature in the Feature Tree, and from the displayed popup submenu, select Edit Feature or Edit Reference Feature as required (see Editing a Feature).
The appropriate function is invoked with the Feature Guide automatically opened at the relevant step. Proceed through the function's steps to edit the feature/reference feature as required.
Click OKOK or ApplyApply in the Feature Guide to complete the function.
Editing the Runner Part feature
Activate the required assembly in the Assembly Tree, then edit the relevant Runner Part feature in the Feature Tree as detailed below.
Right-click on the relevant feature in the Feature Tree, and from the displayed popup submenu, select Edit Feature or Edit Reference Feature as required (see Editing a Feature).
The appropriate function is invoked with the Feature Guide automatically opened at the relevant step. Proceed through the function's steps to edit the feature/reference feature as required.
Click OKOK or ApplyApply in the Feature Guide to complete the function.
Editing the Cut by Runner feature
Activate the required assembly in the Assembly Tree, then edit the relevant Cut by Runner feature in the Feature Tree as detailed below.
Right-click on the relevant feature in the Feature Tree, and from the displayed popup submenu, select Edit Feature or Edit Reference Feature as required (see Editing a Feature).
The appropriate function is invoked with the Feature Guide automatically opened at the relevant step. Proceed through the function's steps to edit the feature/reference feature as required.
Click OKOK or ApplyApply in the Feature Guide to complete the function.
