Ejector Trim 
Access: Open this function from one of the following locations:
-
Select Mold Design > Ejection > Ejector Trim from the menu bar.
-
Select Ejection > Ejector Trim from the Mold Design Guide Toolbar.
Trim ejectors by active parts or faces.
|
|
|
|
Shaped Trim |
Flat Trim |
General Interaction
The following is the Feature Guide for Ejector Trim.
|
|
|
Tip: You can open the Feature Guide at any time by right-clicking the mouse in the graphic display area.Required Step 1 
: Pick the ejectors to be trimmed.
Required Step 2 
: Define the required trimming parameters.
Notes:
-
It is recommended to trim the ejectors and then create a pocket for them.
-
If you want to trim the ejector by the Fixed or Movable Side, this means that the system looks for active faces in the Fixed or Movable Side that will cut the selected ejector. Retainer Pins, for example, do not touch the active faces, so you have to pick the relevant face manually. Only ejectors (or any other objects) that touch the active faces will automatically be cut.
Detailed Interaction
See Options and Results.
