Symbols Menu (Drafting): GD&T Group Tools

Access: Invoke this group of functions from the following locations:

This group of function is used to display Geometric Dimensioning and Tolerancing (GD&T) symbols.

The following functions are available in this group:

	Datum Target	Add a Datum Target symbol to the drawing.
	Geometrical Datum	Create a datum reference to attach to a point on the screen or to one of the following: An edge of a planar surface A non-planar feature of size An extension line off the datum feature surface On a size dimension, placed offset to the dimension arrows On a dimension line inline with the dimension arrows On a leader arrow of a size dimension As one half in an open-ended size dimension (inline with arrow) Off a feature control frame that is applied to a surface Off a feature control frame that is applied to a feature of size
	Geometrical Tolerance	Add a geometric tolerance to the drawing. Geometric tolerances are used to control form, profile, orientation, location and runout.
	Multi Diameter	Add the multi diameter symbol to the drawing. When you use the Multi Diameter function and click a drafting hole in any direction (normal to view orientation, front, side, etc.) the system analyzes the hole segments and sets major diameters in the Multi Diameter symbol.
	Surface Finish	Add a surface finish symbol to the drawing.
	Surface Roughness	Add a surface roughness symbol to the drawing.
	Weld	Add a Weld symbol to the drawing.

Note: For additional information on symbols, see Drafting Symbols.