Min. Corner
Feed

The corner cutting speed of the cutter, measured as a percentage of the main Feed rate. This value is only applicable for angles less than 150°.

If the corner angle > = 150°, the Min. Corner Feed = standard Feed rate.

If the corner angle < = 30°, the Min. Corner Feed rate takes affect.

If the corner angle > 30° and < 150°, the Min. Corner Feed is between the defined Min. Corner Feed and the standard Feed rate, depending on the angle.

This parameter is displayed when:

• Layers or Variable Layers are selected for the Vert. Machining Method in Surface Milling > Finish Mill By Limit Angle.
   

• Round Corners is not selected in High Speed Machining.