General Notes on Parameter Tables

Some parameter branches enable you to define the level of control over their parameters.
The and symbols indicate whether all the parameters in a branch are displayed or only those marked as Show . See Hiding / Showing Parameters.
The and symbols indicate whether the parameter is displayed or hidden. See Hiding / Showing Parameters.
Values that appear in light blue indicate that the value has been modified since activating the procedure. If you close the procedure and reopen, the modified values will appear in black.
When working with Motion Parameters, click the button in the NC Toolbar to display an image describing each parameter you select in the tables.
See Parameter Tables for more details on the parameter table structure.
See Branch Controlled Parameters for information on how to control the display of parameters according to the user's level of experience.
Motion and Machine parameters for specific cutters can be entered in the Cutter dialog.
The Motion and/or Machine parameters in an NC procedure can be updated with the parameter values from the Cutter dialog using the procedure popup menu.
See Customizing Parameter Tables.

In NC parameter tables, the following symbols define the status of parameter values that can be or have been defined by using relations:

No relation used:

A relation can be used to define this parameter value; currently no relation is specified.

Relation used - legal result:

A relation was used to define this parameter value and produced a legal result (the calculated result is within the allowed range of values permitted for this parameter).

Relation used - illegal result:

A relation was used to define this parameter value but produced an illegal result (the calculated result is beyond the allowed range of values permitted for this parameter).

In this case, the displayed result is the nearest permitted value (i.e., either the lowest or highest permitted value).