Cooling Objects

Access: Open this function from one of the following locations:

Select Mold Design > Cooling > Cooling Objects from the menu bar.
Select Cooling > Cooling Objects from the Mold Design Guide Toolbar.

Create an object that will define the holes that will be created around the cooling lines.

Create the cooling channels around the sketched lines, with or without the cutting operation between the cooling objects and the mold plates. If the Without Cut option is used, the cutting operation can be achieved manually by using the Cooling Cut function.

Below is an example of the result of the Cooling Objects operation.

Important: Make sure that the required assembly is activated before using this operation.

General Interaction

The following is the Feature Guide for Cooling Objects.

Tip: You can open the Feature Guide at any time by right-clicking the mouse in the graphic display area.

Required Step 1 : Pick one or more of the cooling sketches or contours.

Required Step 2 : Create the cooling channels.

Optional Step 1 : Set the drilling parameters.

Optional Step 2 : The Cut Manager is displayed; select the parts to be cut by the cooling channel.

Detailed Interaction

See Options and Results.

Some functionality may be dependent on the product package. Contact your Reseller if you require a license.