|
|
Solid Menu: Creation Tools
This group of functions is used to create solid entities.
The following functions are available in this group:
|
|
Create a new object that will be marked and used as a cutting object. |
|
|
|
Drive a contour to add or remove material. |
|
|
|
Create a new object that interpolates a series of sections. |
|
|
|
Drive a circle along a curve to add or remove material. |
|
|
|
Revolve a contour to add or remove material. |
|
|
|
Create a rib to strengthen regions of the part. The rib is based on a 2D wireframe with a defined thickness, draft angle, direction, and a flat or rounded top. |
|
|
|
Create a new object that interpolates a series of sections with a guide curve. |
|
|
|
Obtain the overall size of a part or create a bounding box (stock) around it. In 2D optimization mode, the box is based along the directions of the active UCS. In 3D optimization mode, the system analyzes and calculates the box orientation and the resulting stock is the minimum bounding box or bounding cylinder around the part. The stock size can be manually manipulated. |
|
|
|
Create volumetric text on the part. |
|
