Action: Cutter Compensation

Compensate the cutter length and/or radius by the difference between the measured length/radius to the nominal length/radius. The Cutter Compensation dialog is displayed:

Cutter to Compensate	Click to select the required cutter from the Cutter table.
Adjust Length	Adjust the cutter length to compensate the difference between the measured and nominal values.
Adjust Radius	Adjust the cutter radius to compensate the difference between the measured and nominal values.

Notes:

The available options depend on the selected measurement cycle. Options that are not available are grayed out.
If you have selected a Call or Jump action (in the Pause, Terminate & Report actions), the cutter will be selected by default to the cutter of the first procedure of the Call (the only procedure in the Jump).

Some functionality may be dependent on the product package. Contact your Reseller if you require a license.