Modifying Drill Points

Once you have picked points and defined the drill orientation (for 4 and 5-axis drilling), you can modify the points.

1. In the Edit Points dialog, change Add to Modify.

2. Pick the point you want to modify.

3. Modify the depth, Retract Mode, or the X, Y, Z coordinates of the point.

4. In the case of 4 or 5-axis drilling, click Indicate Direction to change the orientation. Pick two points to define the new orientation vector. The I, J, K fields show the resultant vector.

5. Click Apply to implement the changes.

6. Exit when finished.