Tool Trajectory Parameters: Measurement 
> In-Process Measurement 
/On Machine Inspection 
|
Optimize milling processes combined with feedback from part measurements while the part is on the CNC machine. This procedure performs part measuring operations on the CNC machine and validates the current machining results. You can chose whether to fine-tune successive machining operations (for example, change the cutter diameter compensation value) or to stop the machine to avoid out of tolerance machining. |
|
|
Enable the programming of multiple probing measurements at the end of machining while the part is still on the CNC machine, automatically generating a Quality Assurance (QA) report. |
Tool Trajectory parameters
The In-Process Measurement and On Machine Inspection > Tool Trajectory parameter table branch enables you to define trajectory parameter settings specific to the Measurement procedures. The parameters displayed are identical for all the Measurement procedures.
For a parameter description, click on a parameter in the dialog image below.
Depending on your parameter settings, some parameters may not be available or other parameters may be displayed.
|
|
|
