|
|
Create a Sheet by Applying a Sheet Template in an Electrode Assembly
Access: Open this function from one of the following locations:
-
Select Sheets > Create Sheet > Create Sheet from Template from the menu bar.
-
Select Create Sheet from Template on the popup menu in the Drawing Tree (right-click the Drawing
in the Drawing Tree).
-
Select File > Export > Export To Drafting from the menu bar.
From the Electrode environment, create a sheet from a Sheet Template. This involves applying a Sheet Template to a model to quickly create a drawing sheet from the model.
While in an electrode assembly, you can automatically create an electrode drawing or an assembly drawing or both.
Create a drawing sheet by applying a sheet template while in an electrode assembly
Right-click an electrode or a UCS on the Electrode Tree and select Electrode Drawing, Assembly Drawing or All Drawings. You may also select Electrode > Create Electrode Drawing from the menu bar, and then select the appropriate option, Create Electrode Drawing, Create Assembly Drawing or Create All Drawings.
Running these commands will automatically create a drawing according to predefined templates. The templates to be used are defined in the Electrode section of the Preferences.
Note that in this case you do not have to define a name and location for the drawings; they are named automatically according to the name of the electrode parts.
The drawings are not opened automatically, but the system will inform you when their creation is completed along with the names of the drawings which were created.
|
