|
|
View Menu: ZPR Tools
Access: Open this group of functions from one of the following locations:
Select the appropriate button from the Interactive UCS controls.
Select the View > ZPR section from the menu bar. Select the required function.
This group of functions is used to zoom, pan, and rotate the display.
The following functions are available in this group:
|
Select the center of rotation. |
|
|
Rotate the view by 180 degrees along the Y axis of the display. |
|
|
Rotate to the next view orientation. |
|
|
Pan the model. |
|
|
Rotate to the previous view orientation. |
|
|
Rotate the model. |
|
|
Rotate the view by a defined angle. |
|
|
Rotate the model 90° to the left. |
|
|
Rotate the model 90° to the right. |
|
|
Rotate the selected plane so that it is parallel to the display. |
|
|
Zoom in and out. |
|
|
Zoom in or out so that all entities are visible and occupy the entire display area. |
|
|
Zoom to the defined box selection size. |
|
|
Zoom in. |
|
|
Zoom out. |
|
|
Zoom in or out to automatically center the display around the selected geometry. |
|
