Previous Cutter Diameter

The diameter of the reference cutter (the previous cutter) used to calculate the pencil line segments for the remachine operation. This parameter is only required to set the diameter; there is no necessity to select an actual cutter.
Default: 12 mm (0.5 inch).

This value is read only and is obtained from the Reference Cutter Diameter value of the Remachine Segments Table.

This parameter appears in the Tool Trajectory parameter grid of the Guided Cleanup and Multi Axes Guided Cleanup procedures.

The input for the above mentioned procedures is generated from the Remachine Segments Table. From this table, since only segments from a single 'previous diameter' line can be selected, the 'previous diameter' value is automatically read into procedure's parameter grid.

Some functionality may be dependent on the product package. Contact your Reseller if you require a license.