|
|
Hide/Show Operations
For display purposes, you may want to hide the cutter and/or the motions of one or more procedures. You can also hide entire toolpaths. When an NC file is active, the following NC-related Hide/Show functions are available under the View > Hide Show menu, in addition to the other Hide/Show functions:
|
|
Hide All Motions |
Hide all tool motions. This function is displayed if an NC file is active. |
|
|
Hide Other Procedures Motions Mode |
When set, the motions of one procedure only will be shown. This function is displayed if an NC file is active. |
|
|
Hide/Show Tool |
Hide or show the tool. This function is displayed if an NC file is active. |
|
|
Hide Stock Model |
Hide the stock model. This function is displayed if an NC file is active. |
|
|
Refresh Toolpath |
Refresh the toolpath display. This function is displayed if an NC file is active. |
|
|
Show/Don't Show Tool on Procedure Selection |
Show or don't show the tool when selecting procedures. This function is displayed if an NC file is active. |
|
|
Show Motions |
Show the tool motions. This function is displayed if an NC file is active. |
|
|
Toggle Motions Display |
Toggle the display of tool motions. This function is displayed if an NC file is active. |
These functions are also available by right-clicking and selecting the required function under the Motions & Stock Display flyout list from the popup menu.
Note: When cutter motions of the procedure are hidden, the procedure is assigned a 
status flag in the Process Manager.
|
