Scale /Shrinkage Compensation : Uniform Scale: Options and Results

Access: Open this function from one of the following locations:

Select Solid > Objects > Scale from the menu bar.
Select Parting > Layout Tools > Shrink from the menu bar.
Select Parting Layout Tools > Shrink from the Mold Design Guide Toolbar or Parting Guide Toolbar.

Scale	Scale geometry larger or smaller.
Shrinkage Compensation	Apply Shrinkage Compensation to compensate for part shrinkage during the mold material cooling process, after removal from the mold and cooling to room temperature.

Scale or Shrinkage Compensate. These two functions are very similar; the main difference is that Scale can be performed multiple times, whereas Shrinkage Compensation is usually performed only once to compensate for part shrinkage during the cooling process.

In the Feature Tree, the Scale feature appears for both the Scale and Shrinkage Compensation functions, however they are separate features displaying different feature icons. This enables scaling and shrinkage compensation on the same part.

Scale operations may be performed multiple times, resulting in multiple Scale features.

Shrinkage Compensation is usually performed only once; any additional shrinkage compensation operation always updates the existing Shrinkage Compensation (Scale) feature (if one exists).

Enlarge or shrink geometry by a Uniform scale factor (that is, the same in all directions). The result of uniform scaling is similar (geometrically) to the original.

Required Step 3

Set the Uniform scale parameters. The following parameters are displayed:

None as Factor:		Factor as Factor:		Factor as Percentage:

Parameters

Pre-Defined Factor

Select a scaling factor from the dropdown list. Either select a predefined scaling factor or select None to enter a new scaling amount.

Parameter Examples:Parameter Examples:

The predefined scale factor list is saved in the ScaleFactors.xml file located in the following folder:

...\ProgramData\Cimatron\Cimatron\2026.0\Data

The default predefined scaling factors are:

Uniform: 1.01. Non-Uniform: X = 1.01, Y = 1.01, Z = 1.01.

Uniform: 1.0035. Non-Uniform: X = 1.0035, Y = 1.0035, Z = 1.

Uniform /
Non-Uniform

This is a toggle option Uniform / Non-Uniform, enabling the selection of uniform or non-uniform scaling.

Uniform	Enlarge or shrink geometry by a Uniform scale factor (that is, the same in all directions). The result of uniform scaling is similar (geometrically) to the original.
Non-Uniform	Enlarge or shrink geometry by a Non-Uniform scale factor (with a separate scale factor for each axis direction). Non-uniform scaling occurs when at least one of the scaling factors is different from the others and changes the shape of the geometry; e.g. a square may change into a rectangle, etc.

Parameter Examples:Parameter Examples:

Uniform - single scaling:	Non-Uniform - multi axis scaling:

Show as Factor /
Show as Percentage

This is a toggle option Show as Factor / Show as Percentage, enabling the scaling amount to be shown either as a factor (ratio) or as a percentage.

Parameter Examples:Parameter Examples:

Uniform Example: In the example below, all dimensions will increase uniformly by the single Scaling Rate; in this case, by 3%. The total volume increase = (1.03)3 = 1.09, a 9% increase.
As Factor:	As Percentage:


Non-Uniform Example: In the example below, all dimensions will increase according to the scaling in each of the XYZ axes. The total volume increase = 1.03 * 1.05 * 1.06 = 1.14, a 14% increase.
As Factor:	As Percentage:

Scaling Rate

Enter the scaling value(s). Either a single value for Uniform, or multiple axis values for Non-Uniform.

Parameter Examples:Parameter Examples:

Uniform Example: In the example below, all dimensions will increase uniformly by the single Scaling Rate; in this case, by 3%. The total volume increase = (1.03)3 = 1.09, a 9% increase.
As Factor:	As Percentage:


Non-Uniform Example: In the example below, all dimensions will increase according to the scaling in each of the XYZ axes. The total volume increase = 1.03 * 1.05 * 1.06 = 1.14, a 14% increase.
As Factor:	As Percentage:

Reverse Scale

This is a toggle button to reverse the scale (1/X) on the current value(s). The resultant conversion value is displayed.
This can be used to reverse the scale to the original dimensions.

Parameter Examples:Parameter Examples:

Reverse Scale values As Factor:		Result. As Factor:


Reverse Scale values As Percentage:		Result. As Percentage:

The Reverse Scale parameter only appears in the Scale function.

Save as Pre-Defined Factor

The Save as Pre-Defined Factor parameter is displayed if an entered scaling amount does not appear in the predefined list. Click this button to save the new scaling amount. When a scaling amount is saved as a predefined factor, it appears in the dropdown list.

If material is assigned to the active part, the material data (the material name and any preset scaling factors assigned to that material) is added from the relevant material file to the list of predefined factors.

Parameter Examples:Parameter Examples:

A new scaling amount is entered and the Save as Predefined Factor parameter is displayed:		When a scaling amount is saved as a predefined factor, it appears in the dropdown list:

Manage Pre-Defined Factors

Manage the list of predefined factors. The Manage Pre-Defined Factors dialog is displayed, showing the current content and order of the predefined factor list.

This dialog enables you to perform the following operations on selected rows: change the order, add/edit a comment and delete. Save the changes.

Examples:Examples:

Manage Pre-Defined Factors dialog:	Pre-defined factor list:

Add or edit a comment by double clicking the comment cell. The comment appears in parentheses adjacent to the factor in the dropdown.

Manage Pre-Defined Factors dialog, with an added comment:	Pre-defined factor list, with the comment:

Dialog Buttons:Dialog Buttons:

Manage Pre-Defined Factors dialog buttons:

/	Move: Move the selected row up or down the list.
	Delete: Delete the selected item.
	Save: Save the settings.
	Exit: Exit the operation and close the dialog/task. A message is displayed if changes are not saved.

Volume Rate Change

The total volume increase or decrease. This value is system calculated, based on the single scaling rate (for Uniform scaling) or the multi axis scaling rate (for Non-Uniform scaling).

Parameter Examples:Parameter Examples:

Uniform Example: In the example below, all dimensions will increase uniformly by the single Scaling Rate; in this case, by 3%. The total volume increase = (1.03)3 = 1.09, a 9% increase.
As Factor:	As Percentage:


Non-Uniform Example: In the example below, all dimensions will increase according to the scaling in each of the XYZ axes. The total volume increase = 1.03 * 1.05 * 1.06 = 1.14, a 14% increase.
As Factor:	As Percentage:

Click OKOK or ApplyApply in the Feature Guide to complete the function. The scaling is applied to the object.

To verify the results of the function, you can use the measuring tools to check the object dimensions.

When completed, the Scale feature (together with the scaling data defined as a factor or a percentage) appears in the Feature Tree as follows:

Uniform - As Factor:	Uniform - As Percentage:


Non-Uniform - As Factor:	Non-Uniform - As Percentage:

Scale operations may be performed multiple times, resulting in multiple Scale features.

Shrinkage Compensation is usually performed only once; any additional shrinkage compensation operation always updates the existing Shrinkage Compensation (Scale) feature (if one exists).

Scale attribute: Cimatron Explorer - Preview & Properties, Advanced tab

A Scale attribute displays whether or not a scaling operation has been performed on the part.
The value of the Scale attribute is 1.0 if a scaling operation has not been performed. If the part has been scaled, the value of the last scale operation is displayed as shown below.

Some functionality may be dependent on the product package. Contact your Reseller if you require a license.