|
|
Threads & Ejectors 
Access: Invoke this function from one of the following locations:
-
Select Tools > Main Tools > Threads & Ejectors from the menu bar.
-
Select the
Threads
and Ejectors icon from the Hole Attributes
toolbar.
Attach Thread or Ejector attributes to circular edges and faces, closed loop edges, or edges that have adjacent conic faces.
|
Two holes before running this function. |
The holes after being "threaded". A thread attribute is attached to each of the selected holes. |
|
|
|
A thread or ejector pin attribute can also be attached to holes that are not complete (where the cylinder or arc is not full), as in the example cases shown.
|
|
|
The following is the Feature Guide for Threads & Ejectors.
|
|
|
Tip:Required Step 1 
: Pick the entity to which the Thread or Ejector attribute is to be attached and set the parameters as required.
Optional Step 1 
: Select the required Catalog and Thread Type. This step enables you to select the Catalog Name for the "Associative" and "Non-Associative" threads and also the Thread Type for "Non-Associative" threads only. This step is not available for "Free" threads.
Detailed Interaction
See Options and Results.
|
