Show Analysis 
Access: Open this function from one of the following locations:
-
Select Die Design > Blanking Tools > Show Analysis from the menu bar.
-
Select Show Analysis from the following Die Design Guide: Die Process Design Guide (Forming).
Show the results of the finite element analysis (such as thickness strain and safety zone ranges) on a part where a blank has been created. This function can only be used on a file where a blank has already been created.
Notes:
-
Create a Blank before using the Show Analysis function. Blanks can be created on the following functions, Auto Blank on Binder, Blank, Blank on Binder or Local Blank.
-
The analysis is always done on the last blank created.
-
The edit capabilities are not relevant for this function. Since it used only for viewing data. However, you can re-enter the function at any time to select and view a different data analysis option.
Some analyses can be performed as an optional step in a number of functions, however the Springback Analysis option only appears in the Show Analysis function. Analyses can be performed in the following DieDesign functions:
- Auto Blank on Binder – (in Optional Step 2)
- Blank – (in Optional Step 3)
- Blank on Binder – (in Optional Step 3)
- Local Blank – (in Optional Step 2)
General Interaction
The following is the Feature Guide for Show Analysis.
|
|
|
Tip: You can open the Feature Guide at any time by right-clicking the mouse in the graphic display area.Required Step 1 
: Select the analysis option to view.
Detailed Interaction
See Options and Results.
