Delete Cutter 
Access: Open this function from one of the following locations:
The Cutters and Holders dialog (or the minimized version - the Select Only Mode):
-
When not editing or creating a procedure, select NC-Process > Cutters > Cutters from the menu bar or select Cutters
in the NC Guide Toolbar. -
While editing or creating a procedure, use one of the following methods (in both methods, the Select Only Mode is displayed):
-
In the Advanced Mode, click on the cutter name in the Procedure Parameter Table.
-
In the Wizard Mode, select the cutter button.
-
-
In the Process Manager, click on the cutter name in the procedure row (in this case, the Select Only Mode is displayed).
Delete the selected cutter(s) in the Cutters & Holders dialog or the Cutter Library dialog.
Notes:
-
If Select Only Mode is displayed, switch to Full Dialog Mode to display the full dialog including the cutter parameters.
-
A cutter in use cannot be deleted.
Deleting one or more cutters
-
OpenOpen the Cutters and Holders dialog or the Cutter Library dialog.
-
In the Cutter Table, select one or more cutters to be deleted.
-
Click Delete Selected Cutters
. Confirm in the subsequent dialog to delete and remove your selected items from the Cutter Table. -
Click OK
.
Note: Existing cutter parameters (in the Cutter tab of the Cutters and Holders dialog) can only be deleted if:
