Data To Steel Parameter Exercises

Clean Up Procedure - Limit By Holder/Cutter

1. View the 4th procedure (RM_Cleanup-13).
   In this case, there is no toolpath. The procedure is empty.
   

2. Edit the procedure. Expand the Holder branch as shown in the following image:
   

In this case, when the holder is checked against the stock, the toolpath is empty.
If a holder exists, the selection will be up to (and including) the holder.
In addition, you can set the Z Safety Margin and Radial Safety Margin for the shank.
The result is a complete toolpath that has been checked correctly against the part.

Some functionality may be dependent on the product package. Contact your Reseller if you require a license.