|
|
Forming Punches 
Access: Open this function from the following location:
-
Die Design > Die Quote > Forming Punches from the menu bar.
Define forming and stamping punches. These Punches are to be milled and are therefore priced according to the required milling strategies of rough and finish, and by the required stock material.
The Forming Punches Table displays the relevant data. This information is used later when generating quoting data.
General Interaction
The following is the Feature Guide for Forming Punches.
|
|
|
Tip:Required Step 1 
: Pick a component that represents the stock.
Required Step 2 
: Pick the punch faces.
Required Step 3 
: Define the stamping punch milling volume.
Detailed Interaction
See Options and Results.
|
