|
|
Runner Bodies 
Access: Open this function from one of the following locations:
-
Select Mold Design > Runner > Runner Bodies from the menu bar.
-
Select Runner Design > Runner Bodies from the Mold Design Guide Toolbar.
Create an object that defines the runner; this will be created around the runner contour.
This function creates the runner bodies around the sketched lines, contours, or 3D wire bodies (for 3D runners).
General Interaction
The following is the Feature Guide for Runner Body.
|
|
|
Tip:Required Step 1 
Pick the wire entities (contours) to define the runner. Runner sketches, contours, or 3D wire bodies may be selected.
Required Step 2 
Choose the cross-section of the runner and set the cross section dimensions as well as orientation control.
Optional Step 1 
Adjust the local cross-sections of the segments.
Optional Step 2 
Set the Cold Slug Well parameters.
Detailed Interaction
See Options and Results.
|
