|
|
Solid Extension
Access: Open this function from one of the following locations:
-
Select Electrode > Geometry > Solid Extension from the menu bar.
-
Select Solid Extension from the Electrode Guide.
Create a solid extension on top of the solid body (the solid body created by the Burn Body function).
The Burn Body and Solid Extension functions enable you to create a body and extend it all the way up to the electrode base. Together, these functions enable you to create electrodes using solid tools.
The Solid Extension function is very similar to the Electrode Extensions function.
Note: This function is only available when an electrode is active in an assembly environment.
General Interaction
The following is the Feature Guide for Solid Extension .
|
|
|
Tip:Required Step 1 
: Pick the top face(s) of the solid body(ies) from which to extend.
Required Step 2 
: Set the extension parameters.
Optional Step 1 
: Set the step parameters.
Optional Step 2 
: Set the draft angle parameters.
Detailed Interaction
See Options and Results.
|
