Apply (Load) an Electrode Template by Ref. Selection

Access: Open this function from one of the following locations:

  • Select Electrode > Template > Apply Template by Ref. Selection from the menu bar.

  • Select Apply Template by Ref. Selection from the Electrode Guide.

Apply electrode features from a selected electrode to copy its construction steps into the currently activated electrode.

An Electrode Template holds the electrode features and some of the parameters used to design an electrode. You can use it to save time by creating the entire geometry of an electrode (once the electrode burning faces were defined) automatically.

Note: This function is only available when an electrode is active in an assembly environment.

  1. Pick the area(s) where an electrode is to be added or edited.

  2. InvokeInvoke (for more, click Access at the top of this Help topic) the By Ref. Selection function.

  3. Pick the reference electrode to copy its construction and parameters to the selected area(s).

    The parameters of the selected electrode are applied to all selected area(s).

    Note: Templates applied by Reference Selection can only be applied within the same file, unlike saved templates that can be applied in different files.

Some functionality may be dependent on the product package. Contact your Reseller if you require a license.