Trim Curve : Options and Results

Access: Open this function from the following location:

  • Select Wireframe > Main Tools > Trim from the menu bar.

Trim curves by geometry.

This function is executed by first selecting the curve(s) to be trimmed and then selecting one trimming entity. The trimming entity can be a point, curve, face, or plane. The curves that intersect the trimming entity will be divided into two or more separate curves, depending on the type and location of the trimming entity.

Required Step 1

  1. Pick a group of three curves shown below and <exit><exit>(middle mouse button).

Required Step 2

  1. For the trimming entity, select the diagonal curve.

The curves are trimmed according.

  1. Click Flip Trimming Side to trim the curves by the opposite side of the trimming entity.

  1. Click OKOK or ApplyApply in the Feature Guide to complete the function.

When completed, the Trim Curve feature will appear in the Feature Tree.

Some functionality may be dependent on the product package. Contact your Reseller if you require a license.