|
|
Editing the Cooling
Each of the features created during the cooling design process can be edited. These are as follows:
Editing the Plane Feature
- Activate the Cooling Part in the Assembly Tree, then edit the relevant Plane feature in the Feature Tree, as detailed below.
Right-click on the relevant feature in the Feature Tree, and from the displayed popup submenu, select Edit Feature or Edit Reference Feature as required (see Editing a Feature).
The appropriate function is invoked with the Feature Guide automatically opened at the relevant step. Proceed through the function's steps to edit the feature/reference feature as required.
Click OKOK
or ApplyApply
in the Feature Guide to complete the function.
Editing the Cooling Sketch Feature
Change the skeleton line of the cooling system.
- Activate the Cooling Part in the Assembly Tree, then edit the relevant 'Sketch' feature in the Feature Tree, as detailed below.
Right-click on the relevant feature in the Feature Tree, and from the displayed popup submenu, select Edit Feature or Edit Reference Feature as required (see Editing a Feature).
The appropriate function is invoked with the Feature Guide automatically opened at the relevant step. Proceed through the function's steps to edit the feature/reference feature as required.
Click OKOK or ApplyApply in the Feature Guide to complete the function.
Editing the Cooling Channel Feature
Edit all the cooling channel parameters that were available during the creation stage. The Cooling Channel feature can be edited using one of the following methods:
-
Activating the required assembly
Activate the required assembly in the Assembly Tree, then edit the relevant 'Cooling Channel' feature in the Feature Tree, as detailed below. -
Activating the cooling part
Activate the required assembly in the Assembly Tree, then edit the relevant 'Cooling Channel' feature in the Feature Tree, as detailed below.
Right-click on the relevant feature in the Feature Tree, and from the displayed popup submenu, select Edit Feature or Edit Reference Feature as required (see Editing a Feature).
The appropriate function is invoked with the Feature Guide automatically opened at the relevant step. Proceed through the function's steps to edit the feature/reference feature as required.
Click OKOK or ApplyApply in the Feature Guide to complete the function.
|
