NC Process Menu : Procedure Operations Tools

This group of functions is used for procedure execution operations.

The following functions are available in this group:

	Cancel	Cancel the current operation; close the procedure without saving.
	Execute	Toolpaths and Procedures that have been satisfactorily defined, may be executed (run). The cutter motions are calculated.
	Import Measurement Results	As part of the On Machine Inspection procedure process, import the measurement results file from the CNC controller back to Cimatron. A typical On Machine Inspection procedure scenario involves the following: The On Machine Inspection procedure creates measurement motions in Cimatron that are posted to the CNC machine. The measurements are executed on the machine. The measurements results are imported from the CNC controller back to Cimatron and associated with the On Machine Inspection procedure. An inspection report of the measurement results is created.
	Inspection Report	As part of the On Machine Inspection procedure process after the measurement results have been imported, create an inspection report. The report may be produced in Excel and 3D PDF formats (both formats can be created simultaneously). A typical On Machine Inspection procedure scenario involves the following: The On Machine Inspection procedure creates measurement motions in Cimatron that are posted to the CNC machine. The measurements are executed on the machine. The measurements results are imported from the CNC controller back to Cimatron and associated with the On Machine Inspection procedure. An inspection report of the measurement results is created.
	Save & Calculate	Execute, save and close the procedure. Cutter motions will be calculated.
	Save & Calculate Immediately	Execute the procedure immediately (in foreground mode), save, and close. Cutter motions will be calculated.
	Save & Close	Suspend, save and close the procedure (without executing). Cutter motions can be calculated later.
	Save Original	Save the procedure under a new name and then close it.
	Terminate all Executions	During the execution of a procedure or toolpath, terminate all executions.

Some functionality may be dependent on the product package. Contact your Reseller if you require a license.