Match Points on Point Cloud / STL

Access: Open this function from one of the following locations:

Access: Open this function from the following location:

Select Die Design > Springback > Match Points on Point Cloud / STL from the menu bar.
Select Springback > Match Points on Point Cloud / STL from the following Die Design Guide: Die Process Design Guide (Forming).
Select Solid > Warp > Match Points on Point Cloud / STL from the menu bar.

Create pairs of vectors between source points (a point cloud or regular points) and target points (another point cloud or STL). The resultant pairing between the source and target points is saved in a CSV file. These points can then be used in the Springback table of points.

General Interaction

The following is the Feature Guide for Match Points.

Tip: You can open the Feature Guide at any time by right-clicking the mouse in the graphic display area.

Required Step 1 : Pick the source points (point cloud or regular points) lying close to the skin.

Required Step 2 : Pick the target points (point cloud or STL).

Required Step 3 : Set the method for pairing the source and target points.

Detailed Interaction

See Options and Results.

Some functionality may be dependent on the product package. Contact your Reseller if you require a license.