Twist

Access: Open this function from the following location:

Access: Open this function from one of the following locations:

  • Select Solid > Warp > Twist from the menu bar.

  • Select Die Design > Geometry Manipulation > Twist from the menu bar.

  • Select Geometry Manipulation > Twist from the following Die Design Guide: Die Process Design Guide (Forming).

Twist objects around an axis according to specified angles.

The twisting affect may be global or limited between two planes (normal to the axis). This enables you to perform the following types of operations:

  • Twist entire objects.

  • Twist specific areas of an object, between two points, for example.

  • Define areas not to be twisted and achieve a global twist.

General Interaction

The following is the Feature Guide for Twist.

   Tip: You can open the Feature Guide at any time by right-clicking the mouse in the graphic display area.

Required Step 1 : Pick the Faces of the Solid Object to be Twisted.

Required Step 2  : Pick the Twist Axes.

Required Step 3 : Select Twisting Points and Define Angles.

Detailed Interaction

See Options and Results.

Some functionality may be dependent on the product package. Contact your Reseller if you require a license.