Remachine - Legacy Procedures > Parallel Vertical + All On Surface

The cutter moves in parallel motions.
In Parallel Vertical + All On Surface, all surfaces are milled on surface. In addition, the vertical areas are also milled in Constant Z down steps.

Hints and tips for Cleanup procedures

Illustration of Vertical + All On SurfaceIllustration of Vertical + All On Surface

Create the Remachine Parallel Vertical + All On Surface procedure

See Creating a Procedure for a general explanation.

1. For Technology, choose Remachine as the main selection, and Legacy Procedures > Parallel Vertical + All On Surf. as the subselection.

2. Choose the appropriate cutter.

3. Define the contours, part surfaces, and check surfaces.

4. Define the following Motion Parameters:

   • Approach & Retract

   • Clearance & UCS

   • Entry & End Points

   • Boundary Settings

   • Tolerance & Surf. Offset

   • Tool Trajectory

   • Stock

   • Optimizer

   • User Parameters

5. Define the Machine Parameters.

6. When finished, you can choose from the following Work Mode Dialog buttons:

   • Save & Close to suspend

   • Save & Calculate to execute

   • Save Original

   • Cancel

These options are also available on the Procedure popup submenu.