Volume Milling - Legacy Procedures > Stock Spiral - 3D

Stock Spiral is a suitable milling for an open cavity or for core parts.

Hints and tips for rough waterline cutting procedures

See Creating a Procedure for a general explanation.

1. For Technology, choose Volume Milling as the main selection, and Legacy Procedures > Stock Spiral - 3D as the subselection.

2. Choose the appropriate Cutters & Holders.

3. Define the Geometry; the contours, part surfaces and part2 surfaces.

4. Define the following Motion Parameters:

   • Approach & Retract

   • Clearance & UCS

   • Entry & End Points

   • Boundary Settings

   • Tolerance & Surf. Offset

   • Tool Trajectory

   • Machine Between Layers

   • Stock

   • Optimizer

   • User Parameters

5. Define the Machine Parameters .

6. When finished, you can choose from the following Work Mode Dialog buttons:

   • Save & Close to suspend

   • Save & Calculate to execute

   • Save Original

   • Cancel

(These options are also available on the Procedure popup submenu.)