|
|
Assembly Linear Array 
Access: Open this function from one of the following locations:
-
Click the
button in the
toolbar. -
Select Assembly > Copy > Assembly Linear Array from the menu bar.
Copy components in a linear array.
Create arrays of components in a linear pattern according to specified coordinates or UCS.
General Interaction
This image shows the Feature Guide for Assembly Linear Array.
Required Step 1 
Pick the components to be copied.
Required Step 2 
Select the coordinate system for the array either by picking a UCS or by picking points.
Required Step 3 
Set the parameters of the array. Note that direction arrows are displayed.
Optional Step 1 
Set the offset and rotation parameters.
Optional Step 2 
The Cut Manager is displayed; select the parts to be cut.
Detailed Interaction
See Options and Results.
|
