NC Edit Menu: Change Parameters Tools

This group of functions is used to edit toolpath/procedure parameters.

The following functions are available in this group:

Multi Edit

View, Edit, and Update one or more parameters for certain procedures in a single operation in the Operation Manager.

Change Comment

Change one or more comments for toolpaths/procedures in the Process Manager.

Change Cutter

Change the cutter for selected procedure(s).

Change Spark Gap

Change the Spark Gap parameter value for cutter motions.

Clear "R" and "D" Symbols

Clear the R and D symbols in the Process Manager manually.

Clear Relations

Clear all parameter relations in the active procedure.

Edit NC Setup Parameters

The NC Setup enables you to predefine multiple project-related options in a single place. The NC Setup contains the general data associated with a project, such as the part material, part geometry, machining orientations, fixtures, initial stock, machine name, and post processor. The data defined in the NC Setup is later used as the default for various NC operations. For example, the defined part material is used to set different machining parameters in the cutter definition. The NC Setup parameters can be edited as required.

Edit Procedure Parameters

Edit the procedure parameters.

Edit Toolpath Parameters

Edit the toolpath parameters.

Some functionality may be dependent on the product package. Contact your Reseller if you require a license.