|
|
Add Cutters from the Recently Used List 
Access: Open this function from one of the following locations:
The Cutters and Holders dialog (or the minimized version - the Select Only Mode):
-
When not editing or creating a procedure, select NC-Process > Cutters > Cutters from the menu bar or select Cutters
in the NC Guide Toolbar. -
While editing or creating a procedure, use one of the following methods (in both methods, the Select Only Mode is displayed):
-
In the Advanced Mode, click on the cutter name in the Procedure Parameter Table.
-
In the Wizard Mode, select the cutter button.
-
-
In the Process Manager, click on the cutter name in the procedure row (in this case, the Select Only Mode is displayed).
Add one or more cutters from the Recently Used library (a subset within the Cutter Library) into the Cutter Table of the currently active NC file.
The Recently Used library is an automatic collection that updates according to actions done with cutters. The following actions add cutters to the Recently Used library:
-
Assignment of a cutter to a milling procedure
-
Creating a new cutter
-
Modifying the cutter information
Notes:
-
The Recently Used library is different from any other library in that it shows only the last used cutters in the order they were used and not all the cutters defined in the locations participating in the library.
-
The Recently Used library displays a total number of 20 cutters.
-
If Select Only Mode is displayed, switch to Full Dialog Mode to display the full dialog including the cutter parameters.
Adding one or more cutters from the recently used list
-
OpenOpen the Cutters and Holders dialog.
-
Click the Add cutters from the Recently Used List button
. The Cutter Library dialog is displayed. -
Select the required cutter(s) from the Cutter Table of the dialog. No other operations are allowed, but you can switch between libraries.
-
Click OK
to complete the task. The selected cutter(s) are added to the Cutter Table of the active NC file.
|
