Cimatron Sketcher Functions

Create constraints between entities.

Add selected entities as actual geometry in the sketch.

Add selected entities as reference entities in the sketch.

Create an arc.

Allow the Sketcher to take automatic references (taken for visible entities without adding them as references).

Show automatic references (taken for visible entities without adding them as references).

Create a point at the center of the bounding box of selected entities.

Create a circle.

Close the gap between open end points of curves by modifying the curves.

Define which constraints will be highlighted and created automatically.

Copy, move and rotate selected entities.

Create a sharp, round, or chamfer corner between curves.

Delete all dimensional and geometrical constraints and relations.

Create a dimension.

Trim line or curve portions that are cut by 2 other entities.

Change the X and Y directions of the sketch.

Create an ellipse.

Create a line.

Load an SKF file into the existing sketch.

Mirror selected entities about a line.

Offset curves.

Create a point.

Create N-sided shapes to form an equilateral polygon.

Create a rectangle with square or rounded corners.

Save the existing sketch to an SKF file.

Select entities.

Show all the constraints in the entire sketch.

Show constraints that will be formed when creating new geometry, next to the cursor.

Show open end points of curves that are not connected to other curves.

Display additional sketcher tools.

Create a spline.

Create or select a symmetry line and enter into symmetry mode.

Turn reference entities to geometry and vice versa.

Trim, split and extend one or more curves with a selected curve or a point.