|
|
Views Menu (Drafting): View Creation Tools
Access: Invoke this group of functions from one of the following locations:
-
Select Views > View Creation from the menu bar. Select the required function.
-
Select the required function as specified in the function description.
This group of functions is used to create various types of views.
The following functions are available in this group:
|
|
Create an array of drawings on a single sheet with each drawing in its own frame. |
|
|
|
Create a broken (shortened) view of a long part in Drafting. Broken views can be created with adjustable break lines in a variety of styles. Any dimension made in a broken view is still correct to the part model, as it will automatically compensate for the part length that has been broken away. |
|
|
|
Clip (remove) the portion of a view that is outside the selected contour. A contour must first be defined and then selected as input for the Clip View function, defining the boundaries of the clipping. |
|
|
|
Create a contour to be used for defining special views such as Detailed, Local Section or Clipped View. |
|
|
|
Add a hatched surface to the drawing. |
|
|
|
Create a local section view of any part view. Draw a contour to define the area of the local section view. |
|
|
|
Create multiple views in a single operation. |
|
|
|
Add a section line to the drawing. |
|
|
|
Create a view of a part. |
Note: For additional information on views, see Views.
|
